PTFE Rod

PTFE Rod 1.100%virgin ptfe or recycle ptfe 2.factory direct 3.Min.Order:100KG 4.ISO9001

  PTFE Rod

teflon extruded rodsDia:6mm rod bars,8mm ptfe rods,10mm teflon bars,12mm teflon bars,15mm teflon bars,20mm teflon bars,25mm teflon bars,30mm teflon bars,35mm teflon rods,40mm teflon bars,45mm teflon bars,50mm teflon rods,55mm ptfe rods,60mm ptfe rods,65mm ptfe rods,70mm ptfe rods,75mm ptfe rods,80mm ptfe rods

I,Features

there are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram extruding method in the diameter from 5 to 120mm;rods over the diameter 55 to 300mm are manufactured bu moulding.

 

PTFE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from-180°C-+260° under no burthen circumstances .PTFE has the lowest coefficient of friction of all known solid materials .

II,Types and specifications,stick,bar,rod,plastic rod,plastic bar,plastic stick,plastic round bar,ptfe white rods,ptfe teflon rod

TYPES	Diameter(mm)	Length(mm)
pressed rod	2~4	produced under requirements
extruded rod	5~120	500~3000
die pressed rod	55~300	100~300

III,Main properties

Properties	unit	Result
Apparent density	g/cm 3	2.10~2.30
Tensile strength(min)	MPa	14.0
Crack elongation(min)	%	140

Note  When the diameter of rod is larger than 16mm,only test Apparent density .

IV,Applications              Electrical insulation,seal,anti-sticking materials .

other plastic products:

1. ptfe sheet: ptfe skived sheet & ptfe moulded sheet

2. ptfe rod: ptfe extruded rod&ptfe moulded rod

3. ptfe tube

4. ptfe film

5. ptfe shaped components

 

50mm ptfe rod

 

PTFE Rod