PTFE bar stock

KC PTFE Pressed Rod 1.100% virgin ptfe material 2.Free samples 3.Min order,100KG 4.ISO approved PTFE bar stock

KC PTFE Pressed Rod

 

I,Features

 

there are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram extruding method in the diameter from 5 to 120mm;rods over the diameter 55 to 300mm are manufactured bu moulding.

PTFE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from-180°C-+260°  under no burthen circumstances .PTFE has the lowest coefficient of friction of all known solid materials .

II,Types and specifications

 

TYPES	Diameter(mm)	Length(mm)
pressed rod	2~4	produced under requirements
extruded rod	5~120	500~3000
die pressed rod	55~300	100~300

 

III

,Main properties

 

Properties	unit	Result
Apparent density	g/cm 3	2.10~2.30
Tensile strength(min)	MPa	14.0
Crack elongation(min)	%	140

Note   When the diameter of rod is larger than 16mm,only test Apparent density .

 IV,Applications   

Electrical insulation,seal,anti-sticking materials .

PTFE bar stock